Skip to main content

Yale UNOplus Series A ATEX ratchet lever hoist

Capacity: 750 - 6000 kg. The UNOplus - Series A ratchet lever hoist is a versatile tool for lifting, pulling, and securing of loads characterized by its compact design, robust stamped steel construction and the smoothly running free chaining device.

Standard Configurations

Spec Category 1: 1, 2, 3, 4
Spec Category 2: 5, 10, 15, 20

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features and Benefits

UNOplus-A ATEX Ratchet Lever Hoist
Capacity 750 - 6000 kg

The UNOplus - Series A ATEX ratchet lever hoist is the result of further technical development of the UNOplus, which has proven itself over many years. The versatile tool for lifting, pulling and securing of loads is characterised by its compact design, robust stamped steel construction and the smoothly running free chaining device. The further reduced weight optimizes operation, makes the application even more comfortable and the UNOplus - Series A ATEX to a convenient, versatile device.

Features:
• Due to optimized gearing and improved bearings in the housing cover a minimum effort is required to operate the short hand lever.
• Automatic screw-and-disc type load brake with corrosion protected components.
• Standard free chaining device to quickly attach the load or to pull the chain through the hoist in both directions.
• Robust chain guide rollers eliminate fouling and jamming of chain on the load sheave.
• Robust chain end stop.
• Comfortable rubber grip provides for extra protection against slippage.
• Alloyed steel link chain with zinc-plated resp. yellow chromated finish, in accordance with national and
international standards and regulations.
• Forged suspension and load hooks are made from non-aging, high tensile steel and fitted with robust safety latches.

FEATURES AND BENEFITS

Yale UNOplus-Series A Rachet Lever Hoist

PROTECTION CLASS IP43

Sealed body coated with powder-based paint. Protection class IP43 according to the German standard DIN40050

THREE-PHASE MOTOR

With sliding rotor with conical brake system

GEAR TRAIN

Sealed with oil bath lubrication

STRENGTH

Forged steel hook options provide greater strength

SAFETY

Load hooks with safety tabs

NEMA 4X KEYBOARD

From 2 to 6 movements at low voltage with radio control option

MANUAL AND ELECTRIC TROLLEY OPTIONS

Facilitates displacement of the hoist in the operation

MECHANICAL CLUTCH SYSTEM

Protects from accidental overloads

SAFETY

Friction clutch provides safely at the upper and lower limits of the hook travel, even when the phases are reversed in the electrical connection

RESISTANCE AND MINIMAL WEAR

Steel load chain with high precision calibration

Specifications