Find a contact
Modular Actuator - Rotating Machine Screw Photo
Modular Actuator - Rotating Machine Screw Photo

Modular - Rotating Machine Screw

Modular Actuators

Modular Actuator - Rotating Machine Screw Photo
Modular Actuator - Rotating Machine Screw Photo

RATED LOADS: from 2,000 lbs, varies with gear ratio and motor HP
STANDARD STROKE: up to 24 inches
SPEED: to 170 in/min (varies with load and HP/RPM of motor)

Modular Actuator Spec Sheet

Specifications

Rotating Machine Screw Specifications
Model Number T Screw Diameter Turns of Worm 1 in Travel Torque lb/in at 1000 lb Loads Motor Rated Load
1/3 HP Motor		 Rated Load
1/2 HP Motor		 Rated Load
3/4 HP Motor		 Lifting Speed in/min
#   5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio RPM 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio
M-2462 0.875 Dia. Acme
0.25 Pitch
RH Double		 10 40 39 18 1725 300 700 500 1000 700 1500 170 43
M-2462 0.875 Dia. Acme
0.25 Pitch
RH Double		 10 40 39 18 1140 450 1000 700 1500 1100 2000 114 28
M-2463 1.0 Dia. Acme
0.25 Pitch
RH Single		 20 80 29 14 1725 400 900 600 1400 900 2000 86 21
M-2463 1.0 Dia. Acme
0.25 Pitch
RH Single		 20 80 29 14 1140 600 1400 900 2000 1400 2000 57 14

Notes:
1. Model M-2462 is self lowering and a motor brake should be used.
2. Model M-2463 may drift 0.75 in (20:1 ratio) to 2.0 in (5:1 ratio) when motor is shut off. If this is undesirable, a motor brake should be employed.
3. When ordering other than 56C-face actuators contact applications engineering at 800-477-5002.

Models

Rotating Machine Screw Dimensions

Modular-RMS.jpg