Find a contact
HMPB 500 Series Industrial Linear Actuator
HMPB 500 Series Industrial Linear Actuator

HMPB Series - 500 lbs

Linear Actuators

HMPB 500 Series Industrial Linear Actuator
HMPB 500 Series Industrial Linear Actuator

VOLTAGE: 115 or 220 VAC (50 or 60 Hz)
SCREW TYPE: Acme Screw
STANDARD STROKE: 3 to 18 in (76 to 457 mm)
SPEED: 0.6 to 1.33 in/s (15 to 34 mm/s)
TEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC)
ENVIRONMENTAL RATING: IP50 protection standard (IP52 optional)

Free Application Analysis
HMPS Product Sheet - 500 lb HMPB Dimensional Drawing - 500 lb HMPB OandM Manual - 500 HMPB Specs & Part Numbers - 500 lb Linear Actuator Quick Reference Guide

Specifications
HMPB 500 lb Series Product Specification
Part Number Rated Loads Stroke Length Retracted Length Voltage Current Draw* Speed* Limit Switch Duty Cycle* POT
# (lbs) N In mm In mm (VAC) Hz Amp in/s mm/s Yes/No % Yes/No
MPB6905-3 (500) 2244 3 76 11.25 286 (115) 60 2 0.6 15 Yes 19% No
MPB6905-6 (500) 2244 6 152.4 14.25 362 (115) 60 2 0.6 15 Yes 19% No
MPB6905-12 (500) 2244 12 304.8 20.25 514 (115) 60 2 0.6 15 Yes 19% No
MPB6905-18 (500) 2244 18 457.2 26.25 667 (115) 60 2 0.6 15 Yes 19% No
MPB7905-3 (500) 2244 3 76 11.25 286 (115) 60 1 0.6 15 Yes 22% No
MPB7905-6 (500) 2244 6 152.4 14.25 362 (115) 60 1 0.6 15 Yes 22% No
MPB7905-12 (500) 2244 12 304.8 20.25 514 (115) 60 1 0.6 15 Yes 22% No
MPB7905-18 (500) 2244 18 457.2 26.25 667 (115) 60 1 0.6 15 Yes 22% No
HMPB6905-3 (500) 2244 3 76 11.25 286 (115) 60 5.5 1.33 34 Yes 11% No
HMPB6905-6 (500) 2244 6 152.4 14.25 362 (115) 60 5.5 1.33 34 Yes 11% No
HMPB6905-12 (500) 2244 12 304.8 20.25 514 (115) 60 5.5 1.33 34 Yes 11% No
HMPB6905-18 (500) 2244 18 457.2 26.25 667 (115) 60 5.5 1.33 34 Yes 11% No
PHMPB6905-3 (500) 2244 3 76 11.25 286 (115) 60 5.5 1.33 34 Yes 11% Yes
PHMPB6905-6 (500) 2244 6 152.4 14.25 362 (115) 60 5.5 1.33 34 Yes 11% Yes
PHMPB6905-12 (500) 2244 12 304.8 20.25 514 (115) 60 5.5 1.33 34 Yes 11% Yes
PHMPB6905-18 (500) 2244 18 457.2 26.25 667 (115) 60 5.5 1.33 34 Yes 11% Yes
Clutch models available upon request
Note: A capacitor is required for all AC volt motors. Recommended part SK6405-7-3 (64-72 MFD)
* At Rated Load

Models

HMPB 500 lb. Series Dimensions

HMPB-500 Series Dimensions

HMPB 500 lb. Series Wiring Diagram

HMPB-500 Series Wiring Diagram