Impulse T
Impulse T

IMPULSE® •T

Impulse T
Impulse T
Magnetek's new IMPULSE®•T is the ideal low-cost, easy to configure variable frequency drive for CMAA Class A-D traverse motions.

Features and Benefits

Magnetek's new IMPULSE®•T is the ideal low-cost, easy to configure variable frequency drive for CMAA Class A-D traverse motions.

Magnetek's IMPULSE•T has made drive programming so easy you can get your crane up and running in a few simple steps.  This affordable drive platform makes the IMPULSE•T the ideal solution for contactor control upgrades and basic modernizations.

The IMPULSE•T comes standard with a 120VAC digital interface card with 5 programmable inputs, and can also be fitted with 48VAC, 24VAC, and 24VDC interface cards to meet unique design needs.

UL® recognized motor overload protection comes standard with the IMPULSE•T, protecting your motor and peripheral electronics from damage when a mechanical failure occurs.  Preventative maintenance monitors provide the feedback you need to proactively schedule maintenance and minimize downtime.

Performance Features

  • Digital and analog reference sources 
    • Up to 8-speed multi-step digital speed reference
    • 2-step infinitely variable speed reference
    • 1 analog speed reference:  0-10VDC, 4-20mA, 0-20mA
  • Built-in dynamic braking transistor
  • 1 form C output contact 1 A at up to 250VAC or 30VDC
  • 1 analog monitor output:  0-10VDC proportional to output frequency or current
  • X-Press Programming™ allows programming initial setup within seconds
  • Maintenance timers - operations, cooling fan, soft charge bypass relay, and IGBT
  • Fully adjustable volts/hertz pattern
  • DC injection braking
  • Electronic reversing motor leads
  • Automatic fault reset
  • Adjustable acceleration/deceleration:  0.0 to 25.5 seconds
  • Fault history
  • Hardware and software current limit

Specifications

  • CMAA Class A-D Service
  • Overload capacity:  120% for 60 sec.
  • 40:  1 speed range
  • Starting torque of 150% @ 3Hz
  • Certifications:  UL, cUL, RoHS, CE
  • Ambient service temperature:  -10° to 50°C (+14° to 122°F)
  • Input voltage:  200 to 240VAC, 380 to 480VAC, -15% to + 10%
  • Input frequency:  50/60 Hz; ±-5%

Ratings

  • 380-480VAC, 3/4 to 5HP
  • 200-240VAC, 1 to 3HP

The IMPULSE•T is available as a packaged drive or in a pre-engineered standard panel.  IMPULSE•T drives are backed by our two-year warranty. The IMPULSE•T has replaced the MAC™•2000 product line.  To assist with the conversion, please see our Transition Guide.