Underhung Formed Channel

Budgit Hoists' Underhung Formed Channel End Truck

Browse All Documents

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features and Benefits

Designed for Strength & Durability
End trucks feature a rigid steel welcment, reinforced at the wheel acles and girder connection. The truck weldment uses formed-channel sides and structural steel plates complete with welded girder pads and end plates, forming a rigid u-shaped structure. In addition, the wheels are solid forged steel , heat treated with a hardness of 220-250 BHN, rotating two sealed, lifetime-lubricated ball bearings ensuring smooth, reliable operation.
Gear Reducers
A right-angle, shaft-mounted worm drive gear reducer can be mounted at either end of the bridge. The gear reducers can be mounted on either top-running or under-hung end trucks. Traverse reducer provides stopping motion of the bridge within a distance in feet equal to 10 percent of full load speed in feet per minute (traveling at maximum speed with maximum rated load).
Motor
Drive motor is a 1/2 or a 3/4 horsepower squirrel cage motor that is NEMA design 30-minute rated TENV with Class “F” insulation. The motor is provided with thermal overload protection as standard, with C-face mounted to the gear reducer.
Control Panel
The control panels include mainline contactor, 115-volt control circuit transformer with fused secondary terminal strip, bridge fusing, and reversing contactor in a NEMA 1 enclosure. NEMA 4/12 panels are available as an option.
Fused Disconnect Switch
Fused disconnect switch box has positive power disconnect and crane fusing. NEMA 1 enclosure is standard with NEMA 4/12 available as an option.

Specifications

Model Number	Type	Flange Adjustment
905525SW1
C905360
C905360SR
C905361
C905362
C905362PT
C905362SR
C905368
C905368PT
C905368S
C905368SR
C905368W1
C905368W2
C905369
C905369PT
C905369S
C905369SPT
C905369SR
C905369SRW1
C905369SRW2
C905369SSR
C905369SW1
C905369W1
C905369W2
C905380
C905380PT
C905380SR
C905380W1
C905380W2
C905380W2SR
C905524
C905524PT
C905524S
C905524SR
C905524W1
C905524W2
C905525
C905525PT
C905525S
C905525SR
C905525SRW1
C905525SRW2
C905525W1
C905525W2
C905527

Documents

Brochures & Catalogs

[Brochure] Budgit End Trucks Brochure - EN

Manuals & Supplements

[O&M Manual] Underhung Crane Bridge Kits Operations Manual - EN [Service Manual] Underhung Formed Channel Crane Bridge Kits Parts and Operating Manual - EN

FAQs

What type of beams can Underhung Formed Channel End Trucks operate on?

End trucks feature single-flange wheels have a compound tread for operation on American Standard I-beams or wide flange beams.

What is the motor voltage available?

Single-phase and three-phase motors (½ hp only) are available for these end trucks. Voltages available in single and two speed are 208-230-460-575 volt-3ph-60Hz. Voltages available in single speed only are 115-230 volt-1ph-60Hz. Contact us for any other special speeds or voltages.

What is the wheel diameter?

Wheel diameter is 4” on 3-ton trucks and 6-1/2” on 5-ton trucks. Patented track wheels are available for both capacities.

Do end trucks meet CMAA specifications?

Yes, push-type and gear-type underhung end trucks are designed in accordance with CMAA specifications.

Are cross shafts needed?

For hand-geared and single-drive, motor-driven cranes, cross shafts are required. We offer 1” diameter cross shafts made from AISI 1018 cold drawn steel.

Underhung Formed Channel