Skip to main content
Find a contact
192079438-Pfaff-HSE36.1N-II-200-T24x5 Image
192079440-Pfaff-HSE36.1L-II-200-T24x5 Image
192079441-Pfaff-HSE50.1N-II-200-T40x8 Image
192079442-Pfaff-HSE50.1L-II-200-T40x8 Image
192079443-Pfaff-HSE63.1N-II-200-T50x9 Image
192079444-Pfaff-HSE63.1L-II-200-T50x9 Image
Image HSE Type 2
Image HSE Type 1
192079438-Pfaff-HSE36.1N-II-200-T24x5 Image
192079440-Pfaff-HSE36.1L-II-200-T24x5 Image
192079441-Pfaff-HSE50.1N-II-200-T40x8 Image
192079442-Pfaff-HSE50.1L-II-200-T40x8 Image
192079443-Pfaff-HSE63.1N-II-200-T50x9 Image
192079444-Pfaff-HSE63.1L-II-200-T50x9 Image
Image HSE Type 2
Image HSE Type 1

HSE High-performance screw jack

Screw Jacks

192079438-Pfaff-HSE36.1N-II-200-T24x5 Image
192079440-Pfaff-HSE36.1L-II-200-T24x5 Image
192079441-Pfaff-HSE50.1N-II-200-T40x8 Image
192079442-Pfaff-HSE50.1L-II-200-T40x8 Image
192079443-Pfaff-HSE63.1N-II-200-T50x9 Image
192079444-Pfaff-HSE63.1L-II-200-T50x9 Image
Image HSE Type 2
Image HSE Type 1
192079438-Pfaff-HSE36.1N-II-200-T24x5 Image
192079440-Pfaff-HSE36.1L-II-200-T24x5 Image
192079441-Pfaff-HSE50.1N-II-200-T40x8 Image
192079442-Pfaff-HSE50.1L-II-200-T40x8 Image
192079443-Pfaff-HSE63.1N-II-200-T50x9 Image
192079444-Pfaff-HSE63.1L-II-200-T50x9 Image
Image HSE Type 2
Image HSE Type 1

Lifting forces 5 to 1000 kN
Drive speed up to 3000 min-1
Suitable for medium and high lifting speeds

ATEX 2014/34/EU Questionnaire Drive elements and Lifting units-EN Screw Jacks-Questionnaire-EN O&M-manual-SHE-HSE-IndexE-EN O&M-manuel-SHE-HSE-IndexB-FR Pfaff-HSE-Catalogpages-EN22 Linear Motion - Booklet (EN)

Features & Benefits
The high performance worm gear screw jacks of the series HSE are available for a load range of 5 to 1000 kN. The series HSE has been developed specifically for the dynamic use at medium and high lifting speeds and an increased duty cycle. The housing made of spheroidal graphite iron with the cast-on cooling fins is designed in such a way that high heat dissipation to the surrounding area is ensured.
Features and processing

8 different sizes
Lifting capacities from 5 to 1000 kN
Input speeds up to 3000 min-1
Self-locking trapezoidal screw
Separate lubrication circuits: Tr screw with grease-lubrication and worm gears with oil lubrication
Worm gear pairs in two ratio steps (normal „N“ and slow „L“)
Worm-drive shaft case-hardened and ground
Patented gearing construction with different heat zones for medium and high lifting speeds
Possible usage according to directive 2014/34/EU (ATEX)

Pfaff-silberblau drive elements and complete drive solutions for a wide range of applications in areas such as mechanical engineering, the automotive industry, power supplies, the food industry, logistics applications and much more.